Name: SFCII-30
Brand: SCAG
SKU: SFCII-30-7CV-S

Features

Key Features

Engine Combo
3-in-1 Versatility
Oversized adjustable controls
Operator Control Panel
Quality-of-Cut
Drive System / Offset Blades
Height-of-Cut Adjustment
Steel Frame
Steel Cutter Deck
Front swivel caster wheels

Overview

The SFCII-30 Finish Cut Walk-Behind Mower is big on productivity and versatility, yet is easy to maneuver with a 14-gauge steel deck you can count on.

Specifications

Total Fuel Capacity	1 gallon
Drive Tires	10.5 in x 3 in
Caster Tires	9" x 2.25"
Drive System Type	GT MV 702 Transmission
Pumps	N/A
Motors	N/A
Forward Ground Speed	Up to 3.5 mph
Reverse Ground Speed	N/A
Parking Brake	Hand lever
Cutting Widths	30 in
Type	Extra-strong, stamped steel cutter deck. Offset blade, non-timed deck setup.
Cutting Height	1.5 in to 5 in in .5 in increments.
Lift	Hand lever. Single-point adjustment.
Construction	14-gauge, stamped steel deck shell with 14-gauge spindle reinforcement plate. Side reinforcement plates offer extra protection against impacts.
Spindles	Aluminum housing with sealed ball bearings.
Blade Engagement	Blade brake clutch allows operator to disengage cutter blades without shutting off the machine.

Models & Configurations

Model	Deck	Engine	HP
SFCII-30-7CV-S	30 in	Kohler® Command PRO® CV224	7
SFCII-30-7CV-S-CA	30 in	Kohler® Command PRO® CV224 - CA Compliant	7

Dimensions

	30 in
Length - Minimum (handles in highest operating position)	67.25 in
Length - Max (handles in lowest operating position)	75 in
Tracking Width	29.75 in
Width (with chute)	36.75 in
Width (with block-off plate)	32.5 in
Height - Lowest Operating	35.5 in
Height - Max Operating	48 in
Operating Weight - Bagging	202 lbs.