SCAG

SFCII-30

SFCII-30-7CV-S
Call for Pricing
Call for Pricing & Availability Request a Quote

Features

Key Features

  • Engine Combo
  • 3-in-1 Versatility
  • Oversized adjustable controls
  • Operator Control Panel
  • Quality-of-Cut
  • Drive System / Offset Blades
  • Height-of-Cut Adjustment
  • Steel Frame
  • Steel Cutter Deck
  • Front swivel caster wheels

Overview

The SFCII-30 Finish Cut Walk-Behind Mower is big on productivity and versatility, yet is easy to maneuver with a 14-gauge steel deck you can count on.

Specifications

Total Fuel Capacity1 gallon
Drive Tires10.5 in x 3 in
Caster Tires9" x 2.25"
Drive System TypeGT MV 702 Transmission
PumpsN/A
MotorsN/A
Forward Ground SpeedUp to 3.5 mph
Reverse Ground SpeedN/A
Parking BrakeHand lever
Cutting Widths30 in
TypeExtra-strong, stamped steel cutter deck. Offset blade, non-timed deck setup.
Cutting Height1.5 in to 5 in in .5 in increments.
LiftHand lever. Single-point adjustment.
Construction14-gauge, stamped steel deck shell with 14-gauge spindle reinforcement plate. Side reinforcement plates offer extra protection against impacts.
SpindlesAluminum housing with sealed ball bearings.
Blade EngagementBlade brake clutch allows operator to disengage cutter blades without shutting off the machine.

Models & Configurations

ModelDeckEngineHP
SFCII-30-7CV-S30 inKohler® Command PRO® CV2247
SFCII-30-7CV-S-CA30 inKohler® Command PRO® CV224 - CA Compliant7

Dimensions

30 in
Length - Minimum (handles in highest operating position)67.25 in
Length - Max (handles in lowest operating position)75 in
Tracking Width29.75 in
Width (with chute)36.75 in
Width (with block-off plate)32.5 in
Height - Lowest Operating35.5 in
Height - Max Operating48 in
Operating Weight - Bagging202 lbs.

You May Also Like

Commercial Attachments

SCAG SJ1125-N-34-25KBD

Jackal

Ground Clearance
7.5 in
Auxiliary Hydraulic System
Up to 15 GPM; up to 3,000 psi
Parking Brake
Mechanical sprocket lock